finger fittings header

Our Products.


  • GAS PRESSURE TEST POINT

    pic1

     

    For use in solder and compression fittings, our fittings can also be used with crimp fittings.

    When a pressure test point is required in a copper gas line, often in a commercial or domestic environment, a variety of fittings has to be used i.e.


    a tee with BSP branch
    a reducing bush
    a gas test nipple

    or


    equal tee
    section of pipe
    pipe adaptor to BSP
    reducing bush
    gas test nipple



    Now you can use our GAS FINGER, gas pressure test point.


    Benefits include:-
    Reduced cost - GAS FINGER fits into a standard tee
    Versatility - can be used in the branch of the tee or either end of it
    Stock - carry one specialist item
    Time saved - only one joint to be made
    Ethos - Christmas tree effect done away with.


    Patent Application-No. GB2470283

  • AIR FINGER - 15 mm

    pic2

    Manual Air Vent - for use in solder, compression and push-fit fittings, our fittings can also be used with crimp fittings.

    When a manual air vent is required on heating or hot and cold water lines a variety of fittings has to be used i.e.


    a tee with BSP branch
    a reducing bush
    a BSP manual air vent


    or


    equal tee
    section of pipe
    pipe adaptor to BSP
    reducing bush
    BSP manual air vent



    Now you can use our AIR FINGER, manual air vent.


    Benefits include:-
    Reduced costs - AIR FINGER manual air vent fits into a standard tee
    Versatility - Can be used in the branch of the tee or either end of it
    Stock - carry one specialist item
    Time saved - only one joint to be made
    Ethos - Christmas tree effect done away with.


    Patent Application-No. GB2470283

  • REDUCING FINGER - 15mm x 1/4" BSP

    pic3

    Manufactured in CZ132 thereby conforming to standard set by BS864.

    REDUCING FINGER - for use on soldered, compression and push-fit fittings.

    This fitting allows a direct one move adaptor from copper tube to BSP; allowing one joint from copper pipe to various; e.g. Pressure Safety Valve, Auto Air Vent, Pressure Gauge etc.

    The reducing finger is manufactured in 15mm x 3/8" or 15mm x 1/4"
    Current format is either

    a tee with BSP branch
    a reducing bush


    or


    equal tee
    section of pipe
    pipe adaptor to BSP
    reducing bush



    Now you can use our REDUCING FINGER.


    Benefits include:-
    Reduced cost - REDUCING FINGER fits into a standard tee
    Versatility - can be used in the branch of the tee or either end of it
    Stock - carry one specialist item
    Time saved - only one joint to be made
    Ethos - Christmas tree effect done away with
    Application - can be used with gas, air or water.

     

    AJH HEAT Patent Application-No. GB2470283